Shelf with Perforated Back Panels Tegometall Configurator

Conveniently configure your Tegometall perforated back panel shelf. The parallel and transparent price calculation shows the parts-list and prices for all required elements of the wall shelf. Benefit from this transparency by purchasing a wall shelf from Tegometall.

The hole wall shelf 

configurator gives you the possibility to determine the color, post height and the axis dimension.
Then you can specify the maximum depth and the number of shelves.
The last step of the wall shelf configurator allows the addition of price rails and the base plate. Your Tegometall perforated back panel shelf is then ready.

Store shelves from the market leader Tegometall are characterized by highest quality, easy installation and great stability. The paint job is spotless and withstands high stress in everyday life. This is particularly important with perforated wall shelves, as the attachment of hooks stresses the back walls with holes. The individual shelves can be attached by the plug system in any desired position. Additionally, the shelves, due to their sturdy construction are suitable to carry very large loads.

Basic shelf or add-on shelf?

The basic shelf is free-standing and contains two uprights with two foot parts. Additional shelf elements can be attached to the basic shelf and accordingly only require one upright including a foot part. This is called an add-on shelf. The add-on shelf is not free-standing.

Examples:

a) You need 1 meter of free-standing shelf: Here you have to choose a basic shelf with a 100 cm axis dimension.
b) You need 4 meters of freestanding shelves: Here you have to choose 1 basic shelf and 3 add-on shelves, each with a 100cm axis dimension.
c) You have already installed Tegometall shelves and would like to add them: No problem, because our shelves are original Tegometall and are therefore fully compatible. Accordingly, you can choose our add-on shelves for additions to your existing shelving.

Version of the Perforated Wall Shelf by Tegometall:

• Type: wall shelf with holes
• Complete shelf / Add-on shelf
• Back wall: perforated wall / wall with holes
• Height:
• 1400 mm
• 1600 mm
• 1800 mm (Uprights with a height of 1800 mm are manually shortened Uprights with a corresponding cut edge.)
• 2000 mm
• 2200 mm
• 2400 mm
• Load capacity: depending on the board 85 kg or 125 kg
• Depth of footpart: 37 cm, 47 cm, 57 cm or 67 cm
• Depth of shelf: 30 cm, 37 cm, 47 cm, 57 cm and 67 cm
• Axle dimensions: 62.5 cm, 100 cm and 125 cm
• Wall mounting (1 x per column): at height 220 cm and 240 cm

The Wall Shelf with Hole walls from Tegometall is Available in the Following Colors:

• Jurassic-white (RAL 9001)
• Light-gray (RAL 7035)
• White-aluminum (RAL 9006)
• Anthracite-gray (RAL 7016)
• Any other RAL color on request; Delivery time 6 weeks; additional charge

Accesories for Wall Shelf with perforated back panels from Tegometall

Only transparent price rails are available in the configurator!
If you decide to order price rails, transparent price rails will be added to the shopping cart in the configurator.